Free standing or portable heater and air conditioning system offer great flexibility to the homeowners. However, similar to any other mechanical device it’s important that the system must be properly maintained. This will ensure that the heating or cooling unit works efficiently thereby saving on heating and air conditioning repair in Arlington and Fort Worth Area.
In this article, we will share X tips for portable heating and air conditioning repair in Arlington and Fort Worth Area. By following the tips mentioned here, you will be able to save on energy bills and ensure that the system works efficiently without requiring costly repairs.
1. Make Sure that the Portable System is Placed Properly
You should ensure that the portable system is placed in the right location. Avoid placing the free standing unit in dusty and dirty areas. Dirt and debris can clog the system’s motors. If that happens, it will not only make the system take on more power to cool or warm the room but also require greater heating and air conditioning repair in Arlington and Fort Worth Area.
In addition, you must avoid putting the system in humid and wet areas. This is necessary as moisture can cause damage to the electrical and mechanical parts. Also, you will likely have to drain the unit more often in order to remove excess moisture. If you live in a wet and humid area, it’s recommended that you get the system checked regularly by a professional firm that offers heating and air conditioning repair in Arlington and Fort Worth Area. The technician can detect the problems caused due to excess moisture and take appropriate actions before it results in costly repairs.
2. Ensure Proper Power Supply
Consider buying a surge protector for the system to protect against major damage to the electrical circuitry of the system. The protector will protect from sudden power surges that can literally fry your portable heating or cooling system.
Also, consider installing a power backup device if your area has blackouts during severe weather conditions. The backup device should be able to supply 120V AC for the duration of the power outage that normally occurs in your area. The device should be able to adequately start up the system’s compressor and fan without any problem. For more guidance on selecting perfect surge protectors, you can ask the technician at the firm that offers heating and air conditioning repair in Arlington and Fort Worth Area.
3. Have the Air Filter Cleaned/Replaced Regularly
The importance of properly cleaned filter cannot be emphasized enough. Dirt and debris collect on the filter over time. When the filter becomes clogged, the system will no longer be able to efficiently heat and cool the room. For proper functioning of the system, it is important that the systems filter is cleaned regularly by the s professional technician of a firm that provides heating and air conditioning repair in Arlington and Fort Worth Area.
Regular cleaning of the system will ensure that its works efficiently without requiring much heating and air conditioning repair in Arlington and Fort Worth Area. Apart from cleaning the main air filter of the system, it is also essential to clean the pre-filter that is usually located in the unit’s rear part. Having the pre-filter clean will ensure that the dust does not mix with moisture in the evaporator coil of the unit that can cause major damage to the unit. Avoid using soaps or detergents as the residue can clog the filter.
4. Regular Replacement of Carbon Filter
In addition to the pre-filter, you must also check the carbon filter of the unit. In case the portable unit does have a carbon filter, consider getting it replaced every 3 to 6 months by a professional technician that offer heating and air conditioning repair in Arlington and Fort Worth Area. The expert technician can also clean the rear vent with a vacuum during a routine inspection of the portable system.
5. Make Sure that the Exhaust Pipe is Straight
Keeping the exhaust pipe of the system straight will avoid moisture from gathering inside the portable system. In case the exhaust pipe is not kept straight and short, it will cause moisture to trickle inside the unit causing major damage over time. This can shorten the life of the unit and also increase the need for a heating and air conditioning repair in Arlington and Fort Worth Area.
In addition to making sure that the exhaust pipe is straight, it is also important to let the professional technician of the firm hired for heating and air conditioning repair in Arlington and Fort Worth Area to ensure that excess moisture has not gathered inside the unit. The technician can tell within a few seconds wheeler moisture has gathered inside the unit by performing certain tests. This simple precautionary measure will add years to the life of the unit and ensure that the system works efficiently for a long time.
6. Store the Unit Properly
The freestanding portable unit should be stored properly if you do not plan to use the system for a long time. The first thing that you should do is to properly drain the system to ensure that moisture has not gotten inside the unit.
Next, you must switch to a high-speed fan for about two hours to ensure that the unit’s interior gets properly dried. Finally, you should cover the unit with a plating sheet and keep the unit in a cool and dry place. Avoid putting the unit in a garage or the attic to avoid exposure to excessive cold or heat. Instead, better stores the unit somewhere warm such as in the storage closet.
The above tips will prove invaluable in ensuring that the system is kept in perfect condition. The little extra effort will be worth it in the end as you will be able to ensure that the system works efficiently without any problem. Just remember to get in touch with an experienced firm that offers heating and air conditioning repair in Arlington and Forth Worth Area