We are living in a modern world where technology has provided us with ultimate comfort. The common things we have in our houses today were considered luxury items a few years ago. One of these things is the HVAC system.
The HVAC (Heating Ventilation and Air Conditioning) is a climate control system that helps us stay comfortable in our house all year long. When it’s the sizzling hot summer season, then you turn on the air conditioner. When fall season arrives, then you can utilize the heating of this amazing system.
As convenient as it might be, HVAC systems are also prone to many problems. Therefore, you should be prepared to call for heating and air conditioning repair in Arlington, TX, if you face any of the problems mentioned below:
1. Lack of Maintenance
One of the main reasons why you are facing problems in your HVAC system is the lack of maintenance. Experts recommend that you need to get your HVAC system regularly serviced in order for it to perform at peak level and without any problems. Many people tend to avoid the regular service of the HVAC and then end up facing several problems throughout the year. The best time to get the regular service done is the spring season. This is because during this season you really don’t need any cooling or heating. Therefore, you need to call for heating and air conditioning repair in Arlington, TX, during the spring season for regular service.
2. Clogged Filters
Air filters are fitted inside the HVAC system to filter out all the dust and harmful contaminants from the air before blowing it inside the house. After several months of filtering, the air filters can get clogged with dust and contaminants; therefore, there is a need to change or replace them. If ignored, they can cause problems in the performance of the HVAC system.
Surprisingly, many people ignore the air filters all year round even though it is the simplest of solutions to many problems. All you have to do is take out the air filter and replace it with a new one. If you have reusable air filters, then simply clean it and put it back. You do not need to call for heating and air conditioning repair in Arlington, TX, to change your air filters.
3. Pilot or Ignition Problems
If there is a lack of heat in your house, then it could be ignition problems. Ignition problems are usually caused because of a dirty pilot or faulty burners that might be causing a pilot outage. It could also be a gas supply problem. It could also be because of the wear and tear of an ignition component. All of these problems are not easy to repair; therefore, you should not attempt any repair unless you are a certified technician. It is better to call for heating and air conditioning repair in Arlington, TX.
4. Thermostat Malfunctions
The thermostat is the controlling unit of the HVAC system. Anything the system does is by the order of the thermostat. Therefore, if the thermostat itself starts malfunctioning, then there can be all sorts of problems. Modern programmable thermostats come with replaceable batteries, so you need to make sure the batteries are working. If you are unable to detect the problem yourself, then simply call for heating and air conditioning in Arlington, TX, to come and fix it.
5. Mechanical Wear and Tear
HVAC systems are made of multiple electrical and mechanical equipments. If not maintained regularly, the mechanical parts are destined for wear and tear. All the belts, bearings and fans inside the system will certainly suffer from wear and tear. They may even break. Weird sounds coming out of the HVAC system is one of the biggest signs of wear and tear of the mechanical parts. If you notice any weird noise from the system, then you should immediately call for heating and air conditioning repair in Arlington, TX.
6. Tripped Breakers or Blown Fuses
The breakers and fuses are installed in every home to prevent the electrical surge. This surge can destroy the equipments at home. Breakers and fuses are used for cutting off the electrical connection to keep the equipment safe. The circuit breaker can be turned on again by simply flipping the switch, while the fuse has to be replaced because it literally blows up.
If you notice that the fuses are blowing up constantly and the breakers are tripping more than usual in your home, then it might because of the HVAC system. Filthy air filters can also cause overflowing of current as the system has to work harder to maintain the temperature. Therefore, it is really important to check the air filters first after encountering this problem. If the air filter is clean and the breakers are still tripping, then you can go ahead and call heating and air conditioning repair in Arlington, TX.
7. Dirty Condenser and Evaporator Coils
If you have neglected the regular service on the HVAC system for several years, then surely your condenser and evaporator coils are filthy by now. The dirt and debris outside the coils can seriously halt the progress of the system. The condenser coils are pretty easy to clean as they are in the outside unit. All you have to do is turn off the power to the system and simply hose off the dirt from the coils. The inside coils, however, require a special skill to be cleaned. Therefore, they should only be cleaned by a professional. Therefore, you need to call heating and air conditioning repair in Arlington, TX, to clean off the coils to avoid common problems.
If you are looking for the best heating and air conditioning repair in Arlington, TX, then simply contact Minuteman Heating and Air. We offer the best heating, air conditioning and ventilation service in the areas of Arlington and Mansfield, TX. Contact us today if you have any problems regarding the HVAC system of your home. We will be glad to serve you.