The most common of problems that you may face with your air conditioner is that it doesn’t seem to function properly. Before jumping to conclusions, and opting for air conditioning repair in Arlington and Fort Worth Area, ensure that the doors and windows of the room or inter-connected rooms where your air conditioner is required to cool are closed.
Other issues that arise with air conditioners and will require air conditioning repair in Arlington and Fort Worth Area could have something to do with inadequate maintenance, incorrect installation or poor service procedures. Incorrect installation of an air conditioner can cause ducts to leak and airflow to be low. Sometimes there is not enough refrigerant in the system. When improper refrigerant charging is done at the time of installation then the efficiency and performance of the air conditioner is affected. Service technicians who are not qualified for air conditioning repair in Arlington and Fort Worth Area,
are unable to cater to refrigerant charging problems and often make matters worse by adding more refrigerant to a system that does not require more refrigerant.
If your air conditioner is not functioning, start by checking if the fuse went off or check the circuit breakers. If your air conditioner has been on, turn it off and allow the system to cool down for a few minutes before you reset the breaker. If the air conditioners compressor does not work it is possible that the high-pressure limit switch tripped. In order to reset it push the button that is on the compressor’s access panel. These are a few of the things you can do yourself for air conditioning repair in Arlington and Fort Worth Area,
Room air conditioners have a thermostat sensor that is situated at the backside of the control panel. This thermostat sensor measures the temperature of the air that is coming into the evaporative coil. If there is a problem with the sensor then the air conditioner is likely to function erratically. The thermostat sensor should be close to the coil but should not be touching it; in order to fix it, carefully bend the wire that holds keeps the sensor in place or call for air conditioning repair in Arlington and Fort Worth Area.
When the weather is humid, make it a point to check the condensate drain to ensure that it is not blocked. Room air conditioners are not likely to drain properly if the drain is not mounted.
An air conditioner that does not have enough refrigerant was either not charged enough at the time of installation or else it leaks. In the circumstance that it is leaking, then just adding refrigerant is not the solution. There is a need for air conditioning repair in Arlington and Fort Worth Area, to solve this problem. A proper technician is required to fix the leak, test the system and then charge the system with the right quantity of refrigerant. When the amount of charge matches the manufacturer’s requirements then the air conditioner operates at optimum efficiency and its performance is good.
If you do not maintain your air conditioner properly and if you let the air conditioning coils and filters get dirty, then your air conditioner is not likely to work efficiently and its performance will be low. Furthermore its fans and/or compressors might fail too.
Failure of Compressor and fans
The fans and the compressor are likely to wear out over time, especially if the air conditioner is switched on and off quite frequently. Wires and terminals also get corroded over time so during air conditioning repair in Arlington and Fort Worth Area, the electrical contacts and connections need to be checked by a professional technician.
Some other common problems and what to do about them are as follows:
The Air Conditioner Doesn’t Turn On
If your air conditioner doesn’t turn on then perhaps the thermostat is not set properly or else electricity is not reaching the AC unit. In order to fix this problem, ensure that the thermostat is set at “cool”, also check the temperature setting and ensure that the battery is new. Lastly, check the circuit breaker; maybe it is just a tripped fuse.
The Electricity Bill Is Abnormally High
If there is an abnormal increase in the operating cost of running an air conditioner at your place then this is a sign that your air conditioner is operating inefficiently. The first thing to do is check if the filter needs to be changed, secondly check the condensing coil. The condensing coil is in the outdoor unit of the air conditioner and has many cooling fins which are likely to accumulate debris and dust. The solution to this is to call for air conditioning repair in Arlington and Fort Worth Area.
The AC isn’t cooling as well as last year
If the AC isn’t cooling as well as it was last year then there could be a problem with the airflow. In order to rectify this issue change the filter. The filter generally needs to be changes once in every month or two months.
Outside, ensure that there is at least up to 24 inches of clearance on either side of the Air conditioners outdoor unit and at least 5 feet of clearance above the unit. Also check that there are no hindrances to the home’s cold air registers and returns.
The air conditioner produces strange noises when it is turned on and during the time it remains on
If your air conditioner is ticking, buzzing or rattling then there could be a problem as small as a loose screw or something as problematic as a bum blower motor or that a fan blade in the outdoor unit is bent. The solution to this problem is to call for air conditioning repair in Arlington and Fort Worth Area. The technician will most likely replace the fan motor or the fan blade.
While these were some of the common problems with air conditioners, your air conditioner needs to have a maintenance check at the start of the warm season and regular servicing once every month or two during the cooling season. It is important to call for air conditioning repair in Arlington and Fort Worth Area and reach out to reliable and qualified technicians. For reliable technicians call Minuteman Heating and Air at 817-284-2569.