Heating And AC Repair: The Most Common Heating And Air Conditioning Problems | Arlington, TX

Heating And AC Repair: The Most Common Heating And Air Conditioning Problems | Arlington, TX

Photo By spates at istock

Has your heating system started to make strange noises? Or perhaps your air conditioning stopped working as effectively as it once did? It can be worrying if you start having problems with your heating and air conditioning systems.

If you’re a homeowner, you’ll want to keep your heating and air conditioning unit in good condition. It’s a good idea to have regular serving and heating and AC repair where necessary. There are many different reasons that your heating and air conditioning unit may need to be repaired; this article will look at some of the most common.

If you live in Arlington, TX or the surrounding area and are searching for heating and AC repair, don’t hesitate to contact Minuteman Heating and Air. The company can service your heating and AC system and can diagnose any faults before they become severe.

The Most Common Heating and AC Problems

There are many reasons that homeowners need heating and AC repair; some of them are straightforward to fix, others are more serious and could even mean that you need a new system installed.

There are a few common reasons that homeowners need repair. In about sixty percent of call outs, the system isn’t working effectively due to limited switch breaches. Other common issues include capacitor issues or other small parts that need to be repaired or replaced.

Many of these standard heating and air conditioning issues are preventable; it’s a good idea to have your HVAC serviced every six months to ensure that it’s running correctly and in good condition. A good time to have a service would be in Spring and Fall. This will vary slightly depending on the climate you live in. In Spring, the weather is starting to get warmer, and you should prepare your air conditioning system for the summer months. You wouldn’t have used your AC all winter, so it’s a good idea to have it serviced before the weather heats up and you need to use it. Similarly, you wouldn’t have used your heating all summer, so having a service in Fall will ensure its working. Having heating and AC maintenance at this time will mean you and your family are less likely to be left without heating and have to have an emergency call out in the winter.

What Is a Limit Switch Breach?

Your heating and AC system has a limit switch, which is a safety switch that can shut down your system if any dangerous faults develop. This has a programmable mechanism and is located inside your furnace and air conditioner. One of the most common reasons that the safety switch is activated is if your heating or AC overheats. It does this to stop an electrical fault that could result in a fire or even an explosion.

This mechanism can be life-saving for homeowners and their families. However, once the safety switch is activated and has flipped, you won’t be able to turn your system back on. You’ll need to call in an HVAC specialist who can determine the problem and carry out heating and AC repair.

Limit switches often flip due to dirty air filters; this is a simple heating and Ac repair as it just means that your filters will need to be cleaned out and replaced. Keeping your air filters clean can save you money in the long run as they prevent homeowners from needing emergency repairs.

Air filters help to protect your system’s furnace and air conditioner parts as they trap dust and dirt from the air before it gets into the system. Filters in an air conditioning unit also help to improve the quality of the air inside your home. They also help to maintain energy efficiency and keep your unit running productively.

It’s a good idea to change your air filters every few months to stop the limit switch from being activated.

The Run Capacitor

Around thirty percent of heating and AC repairs are due to problems with the run capacitors. Your unit has run capacitors that are attached to the blower motor in your AC system. Sometimes the capacitor batteries will go bad or run out of energy.

To avoid problems with the run capacitor, you should keep everything in your system clean. By reducing the build-up of dirt and dust in your furnace, your run capacitor will be able to operate smoothly. It will also be more efficient, and there will be less likely that you’ll need heating and AC repair.

Other Types of Heating and AC Issues

Many other common issues that many homeowners face will result in the heating and air conditioning to malfunction. These include an extinguished pilot light or a stalled blower motor. There may also be problems with the circuit boards.

These types of heating and AC repairs are straightforward to fix. They often happen due to normal wear and tear in your system or if your unit or the components are old. It’s estimated that around ninety percent of all repairs can be avoided with regular servicing and maintenance.

Heating and AC Maintenance

Having your heating and AC serviced regularly will allow you to fix any issues before they become more severe and cause serious problems. It will also keep your whole system working effectively and allow the individual parts to last longer. Carrying out maintenance can help to improve your system’s energy efficiency and performance and make it more reliable. It will also help to improve your home’s indoor air quality and will keep your system clean.

It’s recommended that you schedule a service twice a year to prevent costly heating and AC repair. If you live in Arlington, TX, and are looking for a service or any type maintenance, don’t hesitate to contact Minuteman Heating & Air heating on 817-284-2569.