Water damage is among the most prevalent household disasters. If you have ever experienced it, you understand the impacts. A furnace leaking is one of those issues that homeowners contend with. A water-leaking furnace will result in high repair costs and mold growth. Mold poses a significant health problem to you and your family. Hence, you should have it cleaned by an experienced AC repair technician.
If your furnace continues leaking water, it will eventually fail and require a replacement. Are you struggling with a furnace that doesn’t turn on? Then you should have a technician come over for an inspection. It is always a better idea to address the problem before it worsens. An unchecked furnace leak can result in expensive repairs down the line, and you should always pay attention to it. This article outlines why a furnace might leak water and what you can do about it.
What Do Furnace Leaks Look Like?
Under normal circumstances, a furnace doesn’t leak water. However, this might happen because of several issues like a tilted drain pipe, water condensation, a faulty humidifier, or other problems that might cause water to begin pooling beneath your furnace. You should immediately inform an AC repair technician for a deeper inspection whenever you notice this. The professional will also conduct the required repairs once they diagnose the cause of this problem. Never attempt to repair a furnace by yourself. This is because you might not only void any warranty but also expose yourself to various dangers. Hence, always leave any heating and air conditioning repairs to a licensed, experienced professional. Below are the main reasons you may find water pooling around your furnace.
Water Condensation
The first reason for the water pool you see around your furnace is water condensation. It can pool the area surrounding the furnace if it isn’t properly exhausted from the unit. Since this might be what is happening to your heating unit, call a technician near you in Arlington, TX immediately after you notice it. The technician will inspect the system and carry out any required repairs.
Furnace Humidifier Problem
Water leaks from your furnace are sometimes related to your unit’s humidifier problems. Humidifiers draw the water from your plumbing system and add it into the furnace air. The leaks could be a sign that there is a loose pipe or another problem that is resulting in the accumulation of water. If the humidifier is leaking water into your furnace, it also may be leaking contaminated air into the furnace. Hence, you should have it inspected and repaired by a professional AC repair technician.
Clogged Air Conditioner Drain
The other reason you should call an AC repair technician when you see a pool of water around the furnace is because of a clogged condensate drain line. The professional will inspect the unit to determine the real cause. If they trace the problem to the internal pipe, that could be the source. The drain is connected to your AC and could be broken, clogged, or malfunctioning. If left unattended, it might result in corrosion.
Broken Heat Exchanger
The heat exchanger is a thin metal shield that distributes heat from the furnace to the air ducts and, ultimately, throughout your house. It is located between the blower and the combustion chamber of your unit. This has the potential to break and leak condensate. This is another indication that your furnace needs to be completely replaced. Additionally, this is dangerous as it may result in CO leakage through your vents. A cracked heat exchanger may exhibit obvious cracks upon inspection, odd odors, worn parts, or water accumulating around the furnace. To stop CO from seeping into your Arlington, TX home, if you have any of these, you should turn off the furnace and contact an AC repair technician.
Frozen Coils
If your furnace leaks water during the summer, the problem might be because the air conditioner coils are frozen. This may arise because of dirt, clogged air filters, and debris on the AC coils. A refrigerant issue or a lack of airflow can cause the issue too. For this reason, it is recommended that you enlist the help of an experienced AC repair technician to inspect the unit and conduct the repairs. If there are any of the issues above, the coils will be frozen by an ice layer. When the ice melts, it will result in a pooling of water around your furnace.
Inducer Assembly Leaking
When your furnace produces the condensate, it runs down the flue/exhaust pipe through the AC condensate drain line and into the inducer assembly. If there is a crack in the inducer assembly, the water might start leaking from your furnace. Hence, a technician should come over for an inspection and fix. Retain the professional for routine air conditioning service.
Leakage from the Condensate Trap
The Other reason your furnace might leak is a clogged condensate trap. This will make the condensate start backing up and overflowing from the furnace. However, it should be noted that not all high-efficiency furnaces feature a condensate trap. However, your AC repair technician will diagnose the problem and take the appropriate measures to fix it.
Leaking Condensate Pump
The condensate finally drains into the condensate pump. Another component that could clog and cause a leak is this one. The furnace will leak due to a blocked drain, even one that is only partially obstructed. Your high-efficiency furnace isn’t draining properly if you see water on the floor around it or water or rust marks within the cabinet. Similarly, if the condensate pump is faulty, the water might start backing up, resulting in a furnace leak. An AC repair technician will replace it in this case.
Have you noticed water pooling around your Arlington, TX home’s heating unit? Please turn it off and contact us at Minuteman Heating & Air, your reliable AC repair company.