Maximizing the Lifespan of Your Air Conditioner | Heating and Air Conditioning Service in Arlington, TX
Once the tricky stage of buying a new cooling unit is over, you might be looking for different ways and techniques to improve the performance and life of your air conditioner. After all, you invested a lot of money into buying this unit so makes sense why you’d want to make an effort to maintain it!
Get in touch with a heating and air conditioning service in Arlington, TX is a good place to start for all those who are looking to boost the functioning of their air conditioner. All electronic equipment need care; mishandling them will only reduce their lifespan.
An air conditioner needs to be serviced from time to time. It is a good practice to regularly check your cooling unit for faults and performance issues. Unusual noises of the unit can also be a cause of concern.
Hiring a skilled technician for heating and air conditioning service in Arlington, TX is one way to get a tune-up of your unit on time in order to reduce the chance of damage. However, there are other methods as well which will be discussed in this article.
Give Proper Rests
Buying an air conditioner is a big investment so you should ensure that you make the most out of it. Like all other machineries, your cooling unit also needs regular intervals for break. Air conditioners tend to breakdown if they are run constantly for hours.
The professionals of heating and air conditioning service in Arlington, TX recommend giving half an hour break after every three hours of usage. The break will ensure that the unit cools down and works at its full capacity when it is switched on again.
If you had a conversation with an expert of heating and air conditioning service in Arlington, TX, you must have been advised to turn off your unit or lower the cooling before you leave your house. Alternatively, you can also set the air conditioner on fan mode instead of cooling mode.
During night when the weather is a bit cooler, people generally increase the temperature of their unit. These people know the importance of saving their electricity bill and at the same time they are aware that this would help to reduce the chances of repair and servicing.
Regularly Cleaning Your Air Conditioner
What do you do to keep your product safe from dust and dirt? You clean it.
Similarly, you need to regularly clean the filters of your unit. Dust blocks the filters of the air conditioner and this will reduce the cooling performance. So, if you are feeling warm even with your unit on full throttle, the first step is to check the filters.
These components are often covered with dirt and block the flow of air. Removing the dust is simple. All you have to do is wash the filters and dry them before putting them back on. Alternatively, you can blow the dust away by using an appropriate device such as an air blower.
The technicians of heating and air conditioning service in Arlington, TX will normally advise you to clean the filters twice a month if the weather is not so dusty. Filters are usually replaced after 30 to 60 days.
However, if you live in an area where strong winds accompanied with dust are common, then you might even need to clean the filters twice a week. Whatever the case is, you can just pop open the unit’s compartment to check the condition of the filter so that you won’t need to call an expert of heating and air conditioning service in Arlington, TX.
Taking Care of the Outdoor Unit
Leaves and twigs often block the outdoor unit which reduces the capacity of the air conditioner to throw warm air outside. This air comes back circulating into the unit and consequently reduces the efficiency of the cooling component.
The professionals of heating and air conditioning service in Arlington, TX generally inform people to clean their yards after fall season is over. A vacuum can be used to suck all the debris or a blower could be used to remove the leaves and twigs from your garden.
You have to clean both your indoor and outdoor units in order to maximize the performance and prolong the life of your air conditioner. The experts of heating and air conditioning service in Arlington, TX recommend an annual maintenance session of your unit.
Inspecting Your House for Cracks
People don’t know that they can create a major positive difference in the cooling power of their unit by blocking all escape routes for air. Cooled air finds even the smallest possible space to get out of the room. Also hot air will enter through those cracks and crevices.
As a counter measure, you can cover all these spots by using some powder or any other material. Moreover, you can block these holes by pushing furniture in front of them.
Windows can also help in transferring air in and out of the house. That is why it is better to use energy efficient windows which limit the flow of air. Furthermore, you can use blinds, drapes, or curtains on windows to block the warmth of the sun and reduce the room temperature.
Getting Help on Time
If you think you are unable to identify the problem of your air conditioner, then now is the time to call in a skilled technician for heating and air conditioning service in Arlington, TX. Delaying might result in unforeseen circumstances such as your unit might catch fire due to an electrical fault.
Your air conditioner needs regular tune-ups, so make sure to service it yourself or let someone else do the job for you.
Save yourself the hassle of repairing a dead or faulty unit and hire an expert!
Minuteman Heating and AC has numerous professionals that provide heating and air conditioning service in Arlington, TX. If you are looking for an affordable, quick and certified service, then this is the right company for you.